MORRFlate Mega Quad (4-6 Tires, Up To 200″ Wheelbase)

$219.00$283.99

Sitewide Note: All hose kits are currently on back order until roughly the 2nd week of October (if all goes well). Please email if you have any questions at questions@morrflate.com, or if you would like to get on a waitlist rather than place a back order. Thanks!
Note About This Product: All of our inflation/deflation kits now come with our brand new slide valves! Simpler, easier, more ergonomic, and stronger. Slide it up towards the manifold to open the valve. Slide it away from the manifold to close the valve.

-

Inflate, Deflate, and Equalize air pressure in up to 6 tires, all at once. See all of the uses below:

– Air up 1 to 6 tires simultaneously (Less stress on your compressor!)
– Air down 1 to 6 tires simultaneously (Less stress on you!)
– Check all of the tires’ PSI from one spot (No more continuously bending over checking PSIs)
– Move air from a spare tire into other tires
– Effortlessly equalize tire pressures
– Make all 4-6 tires the same pressure
– Run different PSI in the front tires from the back tires
– This version fits up to a 200″ wheelbase with the air source in the middle of the front or rear bumper areas
– If you need a shorter wheelbase, check out the MORRFlate Quad Off Road 4 Tire Inflation Deflation Kit
– If your air source is in a different location, check out our MORRFlate Extensions
– All MORRFlates fit ARB and PowerTank fittings “plug n play” If you have a Smittybilt, Viaire, Warn Powerplant, or something modeled after those, you will need a MORRFlate Adapter Kits.
– Don’t forget your MORRFlate Digital Gauge with your order, so you can set precise and accurate tire PSIs, unlike analog dial gauges.
– Read the entire MORRFlate Off Road 4 Tire Inflation Deflation Kit article for more detailed information!

If you have recessed valve stems, please select the below to receive narrower air chucks to fit your after market valve stem setup. Please note: If you have Apex Rapid Valves, you will need a different setup. Please email us at questions@morrflate.com to set that up.

Description

 

Since this video we have upgraded the carrying bag that comes with your MORRFlate! It now looks like this!

 

Inflate, Deflate, and Equalize up to 4 tires with no installation, and no prep. Just pull your MORRFlate out of its storage bag, hook it onto your tires, and grab a drink while all your friends get their squats in.

The MORRFlate is made with simplicity and durability in mind. It is rated for up to 22CFM, 140psi, -40 to 150 degrees F. It is kink and abrasion resistant, does not hold memory, and there is no installation required.

It will fit up to 200″ wheelbase vehicles (Yes that means your Sprinter and Transit vans!) with an air source in the middle of the front bumper, or middle of the rear bumper.

If you need a shorter wheelbase, check out the MORRFlate Quad+ Off Road 4 Tire Inflation Deflation Kit (up to 155″ wheelbase).

The entire MORRFlate line will work “plug n play” with any air source that uses an “IM Coupler” to connect to. This means ARB compressors and PowerTanks. If you have a Smittybilt, Viaire, Warn Powerplant, or something else modeled off of one of those, you will need to check out our MORRFlate Adapter Kits.

If your air source is in a different location, check out our MORRFlate Extensions.

Don’t forget your MORRFlate Digital Gauge with your order!

To read the complete writeup, check out our article on The MORRFlate Off Road Multi Tire Inflation Deflation Kit.

Additional information

Weight5 lbs
Kit Configuration

Built in Gauge (+$24.99), No Gauge, Tandem/Dually & Gauge (+$64.99), Tandem/Dually Rear Axle (+$40)

Reviews

There are no reviews yet.

Be the first to review “MORRFlate Mega Quad (4-6 Tires, Up To 200″ Wheelbase)”

Your email address will not be published.