Inflate, Deflate, and Equalize up to 2 tires with no installation, and no prep. Just pull your MORRFlate Duo 2 Tire Inflation & Deflation™ Kit out of its storage bag, hook it onto your tires, and grab a drink while all your friends get their squats in.
The MORRFlate Duo + is made with simplicity and durability in mind. It is rated for up to 22CFM, 200 psi, -40 to 150 degrees F. It is kink and abrasion resistant, does not hold memory, and there is no installation required.
Unlike the MORRFlate Quad 4 Tire Inflation & Deflation™ Kit, there is a lot less hose to deal with. However, you can only do 2 tires at a time. So, if you are good at coiling garden hoses, then the MORRFlate Quad 4 Tire Inflation Deflation™ Kit may be the best choice. If not, then the Duo is what you want. We have found that for 34-35″ tires and lower, it is slightly quicker (by a few seconds) to air up and down with the MORRFlate Duo. With tires bigger than 34-35″ it is much quicker to air down with the MORRFlate Quad.
The MORRFlate Duo + is 9 feet longer in total (4.5′ per side) from the MORRFlate Duo. This means you can use it from the front or rear of the vehicle, or the sides. As opposed to the regular Duo where you can only really reach from the sides.
The entire MORRFlate line will work “plug n play” with any air source that uses an “IM Coupler” to connect to. This means ARB compressors and PowerTanks. If you have a Smittybilt, Viaire, Warn Powerplant, or something else modeled off of one of those, you will need to check out our MORRFlate Adapter Kits.
If your air source is in an oddball location, or your portable compressor cant reach to the side of your vehicle, check out our MORRFlate Extensions.
Don’t forget your MORRFlate Digital Gauge with your order!
To read the complete writeup, check out our article on The MORRFlate Off Road Multi Tire Inflation Deflation™ Kits.