MORRFlate Duo (2Tire, 13ft Each Hose)

(1 customer review)

$134.99$159.98

Sitewide Note: All hose kits are currently on back order until roughly the 2nd week of October (if all goes well). Please email if you have any questions at questions@morrflate.com, or if you would like to get on a waitlist rather than place a back order. Thanks!
Note About This Product: All of our inflation/deflation kits now come with our brand new slide valves! Simpler, easier, more ergonomic, and stronger. Slide it up towards the manifold to open the valve. Slide it away from the manifold to close the valve.

-

The MORRFlate Duo has two 13ft hoses coming off of the manifold for a total length of 26ft from air chuck to air chuck.

Inflate, Deflate, and Equalize air pressure in 2 tires, at once. See all of the uses below:

– Air up 1 to 2 tires simultaneously (Less stress on your compressor!)
– Air down 1 to 2 tires simultaneously (Less stress on you!)
– Check 2 of the tires’ PSI from the manifold (No more continuously bending over checking PSIs)
– Move air from a spare tire into another tire
– Effortlessly equalize tire pressures
– Run different PSI in the front tires from the back tires
– If your air source is in a different location, or you need a little bit more reach, check out our MORRFlate Extensions
– Don’t forget your MORRFlate Digital Gauge with your order, so you can set precise and accurate tire PSIs, unlike dial gauges.
– All MORRFlates fit ARB compressors and PowerTanks “plug n play” If you have a Smittybilt, Viaire, Warn Powerplant, or something modeled after those, you will need a MORRFlate Adapter Kits.
– Read the entire MORRFlate Off Road 4 Tire Inflation Deflation™ Kit article for more detailed information!

If you have recessed valve stems, please select the below to receive narrower air chucks to fit your after market valve stem setup. Please note: If you have Apex Rapid Valves, you will need a different setup. Please email us at questions@morrflate.com to set that up.

Description

Inflate, Deflate, and Equalize up to 2 tires with no installation, and no prep. Just pull your MORRFlate Duo 2 Tire Inflation & Deflation™ Kit out of its storage bag, hook it onto your tires, and grab a drink while all your friends get their squats in.

The MORRFlate Duo is made with simplicity and durability in mind. It is rated for up to 22CFM, 150 psi, -40 to 150 degrees F. It is kink and abrasion resistant, does not hold memory, and there is no installation required.

Unlike the MORRFlate Quad 4 Tire Inflation & Deflation™ Kit, there is a lot less hose to deal with. However, you can only do 2 tires at a time. So, if you are good at coiling garden hoses, then the MORRFlate Quad 4 Tire Inflation Deflation™ Kit may be the best choice. If not, then the Duo is what you want. We have found that for 34-35″ tires and lower, it is slightly quicker (by a few seconds) to air up and down with the MORRFlate Duo+. With tires bigger than 34-35″ it is much quicker to air down with the MORRFlate Quad.

The MORRFlate Duo is just over half the overall length of the MORRFlate Duo+. It is comprised of two, 13ft leads (as opposed to two 24ft leads on the Duo+). This means you have less hose to deal with when you coil up the kit and put it away in its carrying bag.

The entire MORRFlate line will work “plug n play” with any air source that uses an “IM Coupler” to connect to. This means ARB compressors and Power Tanks. If you have a Smittybilt, Viair, Warn Powerplant, or something else modeled off of one of those, you will need to check out our MORRFlate Adapter Kits.

If your air source is in an oddball location, or you just want a little bit more reach, check out our MORRFlate Extensions.

Don’t forget your MORRFlate Digital Gauge with your order!

To read the complete writeup, check out our article on The MORRFlate Off Road 4 Tire Inflation Deflation™ Kits.

Additional information

Weight3 lbs
Kit Configuration

Built in Gauge (+$24.99), No Gauge

1 review for MORRFlate Duo (2Tire, 13ft Each Hose)

  1. Bud Stewart

    Just received my MF DUO 12’ with gage and single tooth fittings. I’m really happy with this set up, and the bag keeps it all nice and neat, thank you guys.

Add a review

Your email address will not be published.